Final Design Review Group 34

 

Haley Carroll

Angela Nawrocki

Adam Jung

 

 

How Our Mechanism Works

Our mechanism is comprised of three primary components: the base support, the support arm, and the servo lifting device. The mechanism extends from the clamp area and extends towards the weight by going through the smaller of two holes. By going through the smaller hole, our mechanism takes a more direct route to the weight. Attached to the end of the support arm is the servo lifting device. This is comprised of the servo motor and a lever arm with a counterweight attached. When the servo is in the down position it does not contact the weight, but when the servo is switched on, the lever arm comes into contact with the weight and lifts it.